• After replacing the smart operation panel, if the version of the cheetah system firmware is older than a certain version, update it to a later version.
  • Backup cannot be performed manually by the user or the technician.
  • During the backup, the message being backed up is displayed and other operations cannot be performed.

  • A backup is performed 24 hours after the last backup. If the machine doesn’t have backup data, the first backup is performed at 2:00AM.
  • A backup cannot be performed under any of the conditions below. Backup will retry 1 hour later.
    • During ARFU, firmware updating from download site, etc
    • LCD on the operation panel: ON.
    • HDD cannot be accessed for 60 sec.

  • If the backup data has not changed, no backup will be performed. (Maximum -  7 days)

  • During the backup, the LCD is off.

  • Backup data is stored on the HDD.

  • The amount of time for the backup is as follows:

    Example:

     DataBackup time
    Additional applications106MB1m 6s
    Application settings0.2MB36s
    Total106.2MB1m 42s
Disabling the Backup setting

The default setting is “Enabled”. To change it to “Disabled”, uncheck “Enabled”. Restarting the machine is not necessary.

In Cheetah SP mode, select [Screen Device Settings] > [Backup/Restore Settings] In Cheetah SP mode.