By tilting the fusing unit, you can check whether the feeler does not move smoothly due to burrs on a part in the unit, and remove the burrs.

  1. Tilt the fusing unit [A] approx. 30°.
  2. Put the fusing unit back to the horizontal position.
  3. Perform the checking procedures (Fusing Shield Check).
    There is no blockage: Resolved
    There is a blockage: Not resolved
  4. Tilt the fusing unit [A] approx. 30° in the opposite direction from step 1.

    There is no blockage: Resolved
    There is a blockage: Not resolved