Target Part/SP No.:Paper End Sensor (2nd Feed Tray) (S24)/ SP5-803-019 (Tray 2: Paper End Detection)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 1: Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 0: Paper not detected |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
Feeler for Paper End Sensor (2nd Feed Tray) (S24)
Cause verification | Problem Judgement |
|---|---|
Check if the feeler for 2nd paper end sensor is unfastened. | Feeler is unfastened. |
Solution:
- Reinstall the feeler.
- Check if there are any defects in the 2nd paper feed unit.