Lubrication to the top lands of the teeth of each gear and housing studs (indicated in red in the following diagram).
- Gears and idlers
Studs of the drive unit for paper feed
Apply the specified amount to the lubrication spots.
Lubricate the top lands of the teeth of each gear (shown by red frame) in the directions of the arrow.
If the grease substantially soils the timing belt, clean the belt and adjust the amount of grease on the studs.
Lubrication parts
- 2 gears (4 spots)
- Shaft (stud) (2 spots)
Lubrication amount
Maximum [A] and minimum [B]
Gears
Amount of grease on studs
