Target Part/SP No.:Paper Exit Full Sensor (S11) / SP5-803-012 (Tray Full Exit Sensor)
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 1: Full |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 0: Not full |
Solution:
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
Feeler for Paper Exit Full Sensor (S11)
Check if the operation of the feeler for the paper exit full sensor (S11) is prevented due to the presence of foreign material. | Remove the cause of the malfunction. |