Hold the grips on the machine, align it with the pins, and place the machine on the caster table.
- When you lift the machine, hold the lifting handles.
- In particular, do not lift it by holding the scanner unit, etc., (as it may deform).
- Do not put the machine down on the caster table as a temporary resting place. This may cause the machine to deform. Always connect the machine and caster unit properly.
- When you lift the machine, hold the lifting handles.
- Pull out the 2nd paper feed tray.
- Using a securing bracket, fix the machine to the paper tray unit (spring washer: screw: M4×10).
- Attach the securing brackets at 2 positions to left and right at the rear of the machine (screws: 1 each).
- Reattach the 2nd paper feed tray to the machine.
- Attach the supplied right lower cover to the right side of the machine.