Firmware update can be executed at the programmed date and time.

  1. Enter the SP mode.
  2. Touch [Firmware Update].
  3. Touch [Media Update].
  4. When the following screen is displayed, insert the removable media into the slot on the operation panel and touch [OK].

  5. Touch [Execute].

     

  6. Select the package, and then press [Execute].

  7. Enter update date and time and specify the Retry Setting, then touch [Set].

    In "Retry setting", it is set whether or not to retry when updating cannot be started depending on the state of the machine.

  8. When the following screen is displayed, pull out the removable media from the slot on the operation panel, and then touch [OK].

    Firmware update is executed at the programmed date and time.

    Whether updating is possible or not depends on ARFU setting. However, whether to start updating does not depend on SP5-886-111 (automatic update setting) setting.