Improving the Throughput at the Start of Printing, under Low Temperature, or at Low Voltage

• SP1-124-210 (CPM Down Setting: Temp.:Threshold: Low Power)
• SP1-114-002 (Heat Storage Status: Temp.Threshold: Atmosphere)

This SP above sense the temperature of the fusing unit according to the temperature of the parts inside the unit. When the temperature of the parts reaches the value on this SP, the machine assesses that the fusing unit is warm enough and the function to improve the throughput is automatically turned off. Decreasing this threshold value causes risk of "Fusing Offset".

To increase the printing start timing / initial CPM, keep decreasing the corresponding SP value by 5°C while checking fusibility.

* You can also increase the speed to start printing by changing the SP1-102 (Feed Permit Setting) value. However, to change both the time to start printing and initial CPM, change the abovementioned SP value.