Mechanism to Secure Side Fences
This machine has screws to secure the side fences on the interior of each paper feed tray (Trays 1 to 4).
Remove the securing screws from the interior and apply them to the securing spots on the side fences.
Mechanism to Secure End Fence
This machine has a fixing unit [A] to secure the end fence of each paper feed tray (Trays 2 to 4).
Paper jamming and related SCs due to not setting the end fence properly are prevented by securing the end fence.
The end fence can be moved to give approximately 2 mm gap so that the paper can be loaded easily even if the end fence is secured.
Note: The securing screw can also be turned with the fingers or a coin.
Upper Limit Decals on Side Fences (Tray 1 / Tray 2)
In the previous model [A] only the rear side fence had a decal on it to indicate the upper limit of stacked sheets of paper, but this machine [B] has an additional decal on the front side fence.
