The tray holder can be attached on the front side or the rear side of the finisher.

You instruct to keep the paper feeding unit in the holder when users do not use it.

Front Side of Finisher

  1. Affix the double-sided tape on the back side of the holder.
    Clean the surface with an alcohol-soaked cloth.
  2. Attach the holder to the finisher front cover as shown below.

Rear of Finisher

  1. Attach the holder on rear cover of the finisher.

Main Machine Left Cover

  1. Attach the holder to the main machine left cover.

    If you want to attach another holder, attach it at the position of the blue frame with a double-sided tape.

    If you want to stack two holders side by side, attach them using the supplied spacers as shown below.

    [A]: Holder, [B]: Rivet, [C]: Spacer