- Turn OFF the main power.
Insert the SD card into the SD card slot on the back of the machine.
- Turn ON the main power.
Wait until the update screen starts (about 30 seconds).
When it appears, "Please Wait" is displayed. Select the package, and then press [Execute].
Display
Contents
ROM:
Display installed module number/version information.
NEW:
Display module number/version information in the card.
*The upper row corresponds to the module name, the lower row corresponds to the version number.
After the data waiting screen is displayed, the update is automatically started. When the firmware update is complete, "Update done" is displayed.
The figures at the lower right of the display indicate "Number of updated items/ All items to be updated".
- Turning the main power OFF.
- Remove the SD card.
- Turn the main power ON again, and check whether the machine is operating normally.
- Return the SD card slot cover to the original position.