- SP3-101-001 to 004 (Toner Status :Disp)
Displays the amount of toner remaining for each color. Uses a descending 10-step scale: 10: Full, 2: Estimated toner near end, 1: Definite toner end, 0: Toner end - SP3-110-001 to 004 (Near End Thresh)
Sets the threshold amount of judging near-toner end. - SP3-102-001 to 004 (Toner Remain:Disp: Bottle Motor Bk, C, M, Y)
Displays the remaining toner calculated from the motor running time. - SP3-102-011 to 014 (Toner Remain:Disp: Pixel Bk, C, M, Y)
Displays the remaining toner calculated from imaging size. - SP3-102-021 to 024 (Toner Remaining: Display: Fill Amount Bk, C, M, Y)
Display the filler content of new bottle. - SP3-120-001 to 004 (TE Sn Detect Thresh: Bk, C, M, Y)
Sets the starting threshold of the near-toner end detection by the toner end sensor (S18)(S19)(S20)(S21). - SP3-121-001 to 004 (TE Counter: Disp: Bk, C, M, Y)
Displays the number of times the toner end sensor (S18)(S19)(S20)(S21) detected toner end. - SP3-122-001 to 004 (TE Sn NE Thresh: Bk, C, M, Y)
Sets the number of toner end detection to start near-toner end detection. - SP3-163-001 (Bottle Drive: Set Rotation Time at Toner End)
Sets the empty turn time[ms] at almost toner-end. - SP3-133-011 to 014 (TE Detect :Set Page Cnt:K, C, M, Y)
Displays the amount of sheets printed after toner near end is fixed. - SP3-133-031 to 034 (TE Detect :Set Pxl Cnt:K, C, M, Y)
Displays the amount of toner used in cm2 after toner near-end is fixed. - SP3-210-001 to 004 (TD.Sens:Vt :Disp: Current: K, C, M, Y)
Displays the latest TD sensor output. - SP3-131-001 (Vt TE Thresh: Delta Vt Thresh)
Specifies the threshold to start adding the delta Vt after toner Near End. - SP3-132-001 to 004 (Delta Vt Sum: Bk, C, M, Y)
Displays the integrated value of delta Vt. - SP3-131-011 (Delta Vt Thresh BF NE)
Specifies the threshold to start integrating delta Vt before toner Near End. - SP3-131-012 (Delta Vt Sum Thresh BF NE)
Specifies the threshold of delta Vt to check Toner End before toner Near End.