Target Part/SP No.:Transport Sensor (1st Feed Tray) (S13) / SP5-803-003 (Transport Sensor 1)
| Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0 :Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
• Clean the sensor.
• Reconnect the connector.
• Replace the sensor.
• Replace the Paper Transport IOB (PCB1).
• Replace the harness.
Target Part/SP No.: Transport Motor (M5) / SP5-804-028 (Bypass V-Transport Motor: CW: Std Speed)
| Cause verification | Problem Judgement |
|---|---|
| Turn the referenced motor OFF with OUTPUT check | Drive sound heard |
| Turn the referenced motor ON with OUTPUT check | Drive sound not heard |
Solution:
• Reconnect the connector.
• Replace the motor.
• Replace the Paper Transport IOB (PCB1).
• Replace the harness.