The docking bracket [A] for Booklet Finisher SR3290/Finisher SR3280 [A] (and its screw [B]) can adjust the side-to-side registration.

Procedure
  1. Deliver some A3/DLT or A4 LEF paper to the proof tray and check how much the edge of the paper is shifted from the center scale.

     
    • If the paper shifts towards the front
      Slide the docking bracket towards the front side by the amount of shift, to move the finisher in the same direction.
      e.g.: When the paper has shifted by 4 mm towards the front from the center mark (2 mm/division of the scale), move the docking bracket towards the front by 4 mm (2 divisions). The divisions move towards the rear.

      [A]: Proof tray
      [B]: Docking Bracket Screw

    • If the paper shifts towards the rear
      Slide the docking bracket towards the rear by the amount of shift, to move the finisher in the same direction.
      e.g.: When the paper has shifted by 4 mm towards the rear from the center mark (2 mm/division of the scale), move the docking bracket towards the rear by 4 mm (2 divisions). The divisions move towards the front.

      [A]: Proof tray
      [B]: Docking Bracket Screw

  • After the adjustment, check the side-to-side registration by feeding paper out to the proof tray. If the shift has not been solved, adjust the docking bracket (screw for the docking bracket) slightly again.