• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  • The side tray cannot be used together with the following peripherals:
    - Internal Shift Tray SH3080 (D3FV)
    - Bridge Unit BU3090 (D3FW)
    - Internal Finisher SR 3250 (D3FG)
    - Internal Finisher SR 3300 (D3FT)
    - Internal Multi-Fold Unit FD3010 (D3FS)
  • To use together with the "1 Bin Tray BN3130 ", attach the "1 Bin Tray BN3130" first before installing the side tray.

  1. Remove the packing tape and retainers, and then remove the accessories (screws, etc.).

  2. Remove the inverter tray [A].



  3. Remove the paper exit tray [A].
  4. Remove the connector cover [A].
  5. Remove the paper exit feeler [A].
  6. Tuck in the lever [A] for detecting when the tray is full.
  7. Remove the driven roller [B] at the machine’s exit tray and attach the supplied driven roller [A].
    • Insert a flathead screwdriver into the depression in the center, and then, lifting the driven roller, unlock the part indicated by the red arrow.
    • When attaching the driven roller, push its center all the way in until it clicks.



    [A]: The supplied driven roller has flat rollers.
    [B]: The machine’s standard driven roller has drum-type rollers (as indicated by red frames).

    The spring arm on the flat roller might be disconnected due to the vibration or shock. After attaching the roller, perform a visual check whether the state of assembly is normal or not.

    [A]: Normal position, [B]: spring arm is disconnected.

  8. Attach the paper support guide [A] (Tab x4 ).
  9. Remove the proximity sensor left cover [A].
  10. Attach the bracket [A].
  11. Reattach the proximity sensor left cover [A].
  12. Attach the side tray unit [A] to the machine, and fix with a knob screw.
  13. Attach the fixing plate [A] (×1).
  14. Attach the upper extension tray [A] and the left extension tray [B].
  15. Reattach the inverter tray.
  16. Turn ON the main power.
  17. Check that paper output to the side tray can be selected at the operation panel, and check the operation.