1. Prepare a formatted SD card.
  2. Make sure that the write-protection on the SD card is off.
  3. Turn OFF the main power.
  4. Remove the SD card slot cover [A].
  5. Insert the SD card in service slot [A: Lower Slot].
  6. Enter the SP mode.
  7. Do SP5-846-051 (Backup All Addr Book).
  8. Exit the SP mode, and then turn OFF the main power switch.
  9. Remove the SD card form the SD card slot 2 (lower).
  10. Install the SD slot cover.

  • If the capacity of SD card is not enough to store the local user information, an error message is displayed.
  • Carefully handle the SD card, which contains user information. Do not take it back to your location.