• When installing this option, turn OFF the main power and unplug the power cord from the wall socket. If installing without turning OFF the main power, an electric shock or a malfunction may occur.

  1. Remove the rear cover [A].
  2. Remove the controller box cover [A].
    Red Circle: Remove / Blue Circle: Loosen
  3. Release the latches and remove the standard 2GB DIMM [A].
  4. Insert the Memory Unit Type M37 4GB  into the SDRAM socket.
    Push the release latches [A] until they slip into the notch on the edge of the SDRAM.
  5. Reattach the controller box cover and rear cover.
  6. Turn ON the main power.
  7. Print out the system setting list to make sure that the memory unit is recognized properly.