1. Open the lift cover, and then remove the flat cover [A].
  2. Remove the rear cover [A].
  3. Remove the front cover [A] by sliding it to the arrow direction.
  4. Remove the ground wire, and then disconnect the harness routing to the lift cover.
  5. Remove the lift cover [A].
    The screws must be removed in the order of (1) and (2).

  6. Remove the lower paper guide [C].

    Screw [A]: Silver screw, Screw [B]: Black step screws

    When the lower paper guide is removed, the mounting position [D] of the double-feed Sensor (Emitter) is exposed.