Target Part/SP No.: Duplex Entrance Sensor (S5) / SP5-803-011
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0: Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
- Clean the sensor.
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.
Target Part/SP No.: Duplex Exit Sensor (S3) / SP5-803-010
Cause verification | Problem Judgement |
|---|---|
Execute an INPUT check when there is no paper at the position of the referenced sensor. | 0: Paper detected |
Execute an INPUT check when there is paper at the position of the referenced sensor. | 1: Paper not detected |
Solution:
- Clean the sensor.
- Reconnect the connector.
- Replace the sensor.
- Replace the Paper Transport IOB (PCB1).
- Replace the harness.