Paper size is set as shown below when the machine is shipped from the factory.

  • NA: LT LEF
  • EU.AA.CHN: A4 LEF

The paper size can be changed to A4 or LT.

  1. Pull out the left tray and right tray.
  2. Remove the screws on the right tray side fences (front [A], rear [B]) and right tray end fence [C] (×3).
  3. Remove the screws on the left tray side fences (front [A], rear [B])
  4. Slide the fences to the required position (A4 or LT), and then tighten the screws.
    [A]: A4 position (screw holes of the metal frame are hidden)
    [B]: LT position (screw holes of the metal frame are visible)
  5. Make sure that the spring [A] is attached.
  6. Specify the following SP to set the paper size of the tandem paper tray.
    SP5-181-007 (Size Adjust: TRAY 3/T-LCT: 1)
    0: A4 LEF
    1: LT LEF