1. Push the harness into the cutout of the frame.
  2. Reattach the lower paper guide.
    Confirm that there is no entrapment of the harness at the cutout position (blue square).
  3. Insert the shaft of the lift cover into the hole of the rear frame and reattach the lift cover.
    Insert the black rubber [A] so that it fits outside of 5 hooks [B].

  4. Fasten the lift cover.
    The screws must be reinstalled in the order of (1) and (2).
  5. Connect the harness routed from the lift cover, and then fasten the ground wire.
  6. Reattach the exterior covers.