- Do not operate the machine until the test pattern is printed out completely. Otherwise, SC will occur.
- Enter the SP mode, and then select SP2-109-003.
Select the test pattern to print from the list, and then press [OK].
No.
Pattern
No.
Pattern
0
Copy image
12
Independent Pattern (2dot)
1
Vertical Line (1dot)
13
Independent Pattern (4dot)
2
Vertical Line (2dot)
14
Trimming Area
3
Horizontal Line (1dot)
15
Hound's Tooth Check (Vertical)
4
Horizontal Line (2dot)
16
Hound's Tooth Check (Horizontal)
5
Grid Vertical Line
17
Band (Horizontal)
6
Grid Horizontal Line
18
Band (Vertical)
7
Grid Pattern Small
19
Checker Flag Pattern
8
Grid Pattern Large
20
Grayscale (Vertical Margin)
9
Argyle Pattern Small
21
Grayscale (Horizontal Margin)
10
Argyle Pattern Large
22
Wormy Pattern
11
Independent Pattern (1dot)
23
Full Dot Pattern
- Select SP2-109-005 (1: Full Color, 2: Cyan, 3: Magenta, 4: Yellow, 5: Black) to select the printing color.
To change the density of test pattern, select density with SP2-109-006 to 009 for each color.
- If select "0" with SP2-109-006 through 009, the color adjusted so will not show up in the test pattern.
To print out the test pattern, press "Copy Window", then specify the settings on the copier application for test print (paper size etc…).
- Press "Start" to start the test print.
- After checking the test pattern, press "SP Mode" on the LCD to return to SP mode display.
- Restore all settings to their original values.
- Exit the SP mode.