- Open the front cover.
- Shake the toner bottle (Bk) 7 to 8 times.
- Remove the toner bottle protection cap.
- Push the toner bottle into the machine slowly.
- Set the toner bottles (Y, M, and C) in the same way.
- Close the front cover.
Connect the power cord to the machine.
- Use the power cord that is provided with the machine. Do not use any other power cord. Also, do not use an extension cord.
- Turn ON the main power.
- Toner Initialization starts. It takes about 5 minutes to fill the toner up.
Wait until it finishes, or the Auto Color Calibration (ACC) will take longer. - The Program/Change Administrator screen is displayed at the first power-up. Follow the procedure in Main Machine Installation: Important Notice on Security Issues.
- Toner Initialization starts. It takes about 5 minutes to fill the toner up.
After changing the administrator/supervisor password, turn the main power OFF and back ON again.
- The machine may be ON even the display looks OFF. So before power cycling, make sure the power indicator is OFF.
- After the toner initialization is completed, the machine beeps, and the following message is displayed. Turn the main power OFF and back ON again.
